Forum Debian Users Gang

Timing buffered disk reads:  112 MB in  3.01 seconds =  37.25 MB/sec

/dev/hda:
 Timing buffered disk reads:  122 MB in  3.06 seconds =  39.92 MB/sec

1) ) #1 SMP Sun Feb 21 07:46:30 CET 2010
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
 BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
 BIOS-e820: 00000000cff70000 - 00000000cff76000 (ACPI data)
 BIOS-e820: 00000000cff76000 - 00000000cff80000 (ACPI NVS)
 BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0xcff70 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0D0000000 mask FF0000000 uncachable
  1 base 0E0000000 mask FE0000000 uncachable
  2 base 000000000 mask F00000000 write-back
  3 base 0CFF80000 mask FFFF80000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 37d6d000 - 37feff35
Allocated new RAMDISK: 00705000 - 00987f35
Move RAMDISK from 0000000037d6d000 - 0000000037feff34 to 00705000 - 00987f34
ACPI: RSDP 000f6170 00014 (v00 PTLTD )
ACPI: RSDT cff7070d 00038 (v01 PTLTD    RSDT   06040000  LTP 00000000)
ACPI: FACP cff75e1e 00074 (v01 INTEL  CANTWOOD 06040000 PTL  00000003)
ACPI: DSDT cff70745 056D9 (v01  INTEL CANTWOOD 06040000 MSFT 0100000C)
ACPI: FACS cff76fc0 00040
ACPI: APIC cff75e92 00074 (v01 PTLTD     APIC   06040000  LTP 00000000)
ACPI: BOOT cff75f06 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: ASF! cff75f2e 0009B (v32 IBM        CETP 06040000 PTL  00000001)
ACPI: SSDT cff75fc9 00037 (v01 PTLTD  ACPIHT   06040000  LTP 00000001)
ACPI: Local APIC address 0xfee00000
2439MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 0000700df4]    TEXT DATA BSS ==> [0000100000 - 0000700df4]
  #4 [000009b400 - 0000100000]    BIOS reserved ==> [000009b400 - 0000100000]
  #5 [0000701000 - 00007041d0]              BRK ==> [0000701000 - 00007041d0]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [0000705000 - 0000987f35]      NEW RAMDISK ==> [0000705000 - 0000987f35]
  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00f6140] f6140
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x000cff70
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009b
    0: 0x00000100 -> 0x000cff70
On node 0 totalpages: 851723
free_area_init_node: node 0, pgdat c06374c0, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3963 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 4879 pages used for memmap
  HighMem zone: 619619 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c2a10000, static data 21020 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 845068
Kernel command line: root=/dev/hda1 ro quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 3200.810 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:000cff70)
Memory: 3369720k/3407296k available (3768k kernel code, 36340k reserved, 1670k d                                             ata, 380k init, 2497992k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4f000 - 0xfffff000   ( 704 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc065a000 - 0xc06b9000   ( 380 kB)
      .data : 0xc04ae1d5 - 0xc064fc64   (1670 kB)
      .text : 0xc0100000 - 0xc04ae1d5   (3768 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6401.                                             62 BogoMIPS (lpj=12803240)
Security Framework initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6401.56 BogoMIPS (lpj=12803127)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (12803.18 BogoMIPS).
net_namespace: 772 bytes
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  5051.000 MB/sec
xor: using function: pIII_sse (5051.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd73f, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd2000000-0xd3ffffff]
pci 0000:00:1d.0: reg 20 io port: [0x1400-0x141f]
pci 0000:00:1d.1: reg 20 io port: [0x1420-0x143f]
pci 0000:00:1d.4: reg 10 32bit mmio: [0xd0000000-0xd000000f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000400-0xd00007ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1460-0x146f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x1440-0x145f]
pci 0000:02:01.0: reg 10 32bit mmio: [0xd0120000-0xd013ffff]
pci 0000:02:01.0: reg 14 32bit mmio: [0xd0100000-0xd011ffff]
pci 0000:02:01.0: reg 18 io port: [0x2000-0x201f]
pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:00:03.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:03.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
pci 0000:03:01.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:03:01.0: reg 14 64bit mmio: [0xd0202000-0xd0202fff]
pci 0000:03:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:03:04.0: reg 10 io port: [0x3800-0x38ff]
pci 0000:03:04.0: reg 14 64bit mmio: [0xd0200000-0xd0201fff]
pci 0000:03:04.0: reg 1c io port: [0x3400-0x34ff]
pci 0000:03:04.0: reg 30 32bit mmio: [0x000000-0x07ffff]
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xd0200000-0xd02fffff]
pci 0000:04:02.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
pci 0000:04:02.0: reg 14 io port: [0x4000-0x40ff]
pci 0000:04:02.0: reg 18 32bit mmio: [0xd0300000-0xd030ffff]
pci 0000:04:02.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:04:02.0: supports D1 D2
pci 0000:04:03.0: reg 10 32bit mmio: [0xd0340000-0xd035ffff]
pci 0000:04:03.0: reg 14 32bit mmio: [0xd0320000-0xd033ffff]
pci 0000:04:03.0: reg 18 io port: [0x4400-0x443f]
pci 0000:04:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:04:03.0: PME# supported from D0 D3hot D3cold
pci 0000:04:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xd0300000-0xd03fffff]
pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CSA_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 11 14 15) *5
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *7
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1    783 MB/s
raid6: int32x2    842 MB/s
raid6: int32x4    652 MB/s
raid6: int32x8    606 MB/s
raid6: mmxx1     1923 MB/s
raid6: mmxx2     2287 MB/s
raid6: sse1x1    1141 MB/s
raid6: sse1x2    1961 MB/s
raid6: sse2x1    2293 MB/s
raid6: sse2x2    3069 MB/s
raid6: using algorithm sse2x2 (3069 MB/s)
PCI: Using ACPI for IRQ routing
pci 0000:00:1e.0: BAR 7: can't allocate resource
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1180-0x11bf has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x500-0x54a has been reserved
system 00:01: ioport range 0x54c-0x580 has been reserved
system 00:01: ioport range 0xfe00-0xfe00 has been reserved
system 00:01: ioport range 0xfe10-0xfe11 has been reserved
system 00:01: iomem range 0xfecf0000-0xfecfffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0:   IO window: 0x2000-0x2fff
pci 0000:00:03.0:   MEM window: 0xd0100000-0xd01fffff
pci 0000:00:03.0:   PREFETCH window: 0x000000d4000000-0x000000d40fffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0xd0200000-0xd02fffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000d4100000-0x000000d41fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xd0300000-0xd03fffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xd0100000-0xd01fffff]
pci_bus 0000:02: resource 2 pref mem [0xd4000000-0xd40fffff]
pci_bus 0000:03: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:03: resource 1 mem: [0xd0200000-0xd02fffff]
pci_bus 0000:03: resource 2 pref mem [0xd4100000-0xd41fffff]
pci_bus 0000:04: resource 0 mem: [0x2000-0x2fff]
pci_bus 0000:04: resource 1 mem: [0xd0300000-0xd03fffff]
pci_bus 0000:04: resource 2 pref mem [0xe0000000-0xefffffff]
pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2571k freed
Simple Boot Flag at 0x38 set to 0x1
Machine check exception polling timer started.
cpufreq-nforce2: No nForce2 chipset.
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1266746815.119:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.11)
msgmni has been set to 1709
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
disabled boot interrupt on device 0x8086:0x25ac
pci 0000:04:02.0: Boot video device
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /class/input/input1
ACPI: Power Button [PWRB]
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
intel_rng: FWH not detected
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 sec                                             onds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legac                                             y ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
aic7xxx 0000:03:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
        <Adaptec 29160B Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

aic79xx 0000:03:04.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
scsi3 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
        <Adaptec AIC7901 Ultra320 SCSI adapter>
        aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66MHz, 512 SCBs
scsi 3:0:2:0: Direct-Access     HP       18.2GB C 80-F610      PQ: 0 ANSI: 2
 target3:0:2: asynchronous
scsi3:A:2:0: Tagged Queuing enabled.  Depth 32
 target3:0:2: Beginning Domain Validation
 target3:0:2: wide asynchronous
 target3:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 127)
 target3:0:2: Domain Validation skipping write tests
 target3:0:2: Ending Domain Validation
scsi 3:0:4:0: Direct-Access     HP       18.2GB C 80-F610      PQ: 0 ANSI: 2
 target3:0:4: asynchronous
scsi3:A:4:0: Tagged Queuing enabled.  Depth 32
 target3:0:4: Beginning Domain Validation
 target3:0:4: wide asynchronous
 target3:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 127)
 target3:0:4: Domain Validation skipping write tests
 target3:0:4: Ending Domain Validation
Adaptec aacraid driver 1.1-5[2461]-ms
aic7xxx 0000:03:01.0: BAR 1: can't reserve mem region [0xd0202000-0xd0202fff]
aic7xxx: <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> at PCI 3/1/0
aic7xxx: I/O ports already in use, ignoring.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
iscsi: registered transport (cxgb3i)
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sd 3:0:2:0: Attached scsi generic sg0 type 0
sd 3:0:4:0: Attached scsi generic sg1 type 0
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methods
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
IMQ driver loaded successfully.
        Hooking IMQ after NAT on PREROUTING.
        Hooking IMQ before NAT on POSTROUTING.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0000400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001420
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input2
Linux video capture interface: v2.00
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.2
u32 classifier
    Performance counters on
    input device check on
    Actions configured
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP bic registered
NET: Registered protocol family 17
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Using IPI No-Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
input: AT Translated Set 2 keyboard as /class/input/input3
sd 3:0:2:0: [sda] 35566480 512-byte hardware sectors: (18.2 GB/16.9 GiB)
sd 3:0:2:0: [sda] Write Protect is off
sd 3:0:2:0: [sda] Mode Sense: ab 00 10 08
sd 3:0:2:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and F                                             UA
sd 3:0:4:0: [sdb] 35566480 512-byte hardware sectors: (18.2 GB/16.9 GiB)
sd 3:0:4:0: [sdb] Write Protect is off
sd 3:0:4:0: [sdb] Mode Sense: ab 00 10 08
 sda:<5>sd 3:0:4:0: [sdb] Write cache: disabled, read cache: enabled, supports D                                             PO and FUA
 sdb: unknown partition table
sd 3:0:2:0: [sda] Attached SCSI disk
 unknown partition table
sd 3:0:4:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 380k freed
input: ImExPS/2 Generic Explorer Mouse as /class/input/input4
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000 0000:02:01.0: setting latency timer to 64
piix 0000:00:1f.1: IDE controller (0x8086:0x25a2 rev 0x02)
PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1460-0x1467
    ide1: BM-DMA at 0x1468-0x146f
Probing IDE interface ide0...
e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:09:6b:7f:6a:02
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:04:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
hda: ST380021A, ATA DISK drive
e1000: 0000:04:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:09:6b:7f:6a:03
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
udev: renamed network interface eth1 to eth0
udev: renamed network interface eth0_rename to eth1
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes not supported
 hda: hda1 hda2 < hda5 hda6 >
md: md0 stopped.
md: bind<sdb>
md: bind<sda>
md0: setting max_sectors to 64, segment boundary to 16383
raid0: looking at sda
raid0:   comparing sda(35566336)<6> with sda(35566336)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb
raid0:   comparing sdb(35566336)<6> with sda(35566336)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 71132672 sectors.
raid0 : conf->spacing is 71132672 sectors.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
 md0: unknown partition table
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
udevd version 125 started
Adding 2650684k swap on /dev/hda5.  Priority:-1 extents:1 across:2650684k
EXT3 FS on hda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
warning: `pure-ftpd-mysql' uses 32-bit capabilities (legacy support in use)
ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://www.barbara.e                                             u.org/~quaker/ipt_account/

Module                  Size  Used by
xt_mark                 1456  6
xt_layer7               9476  4
xt_MARK                 1772  4
xt_CONNMARK             2528  4
xt_IMQ                  1552  2
xt_dscp                 2032  1
xt_DSCP                 2660  16
xt_connlimit            3452  1
nf_nat_pptp             2552  0
nf_conntrack_pptp       5568  1 nf_nat_pptp
nf_conntrack_proto_gre     4900  1 nf_conntrack_pptp
nf_nat_proto_gre        1940  1 nf_nat_pptp
nf_nat_irc              1816  0
nf_conntrack_irc        4780  1 nf_nat_irc
nf_nat_ftp              2260  0
nf_conntrack_ftp        6520  1 nf_nat_ftp
ipt_REJECT              2496  3
ipt_account            10032  1
xt_TCPMSS               2736  2
xt_state                1764  12
iptable_mangle          2252  1
iptable_nat             4352  1
nf_nat                 16596  5 nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,nf_nat_ftp,iptable_nat
xt_multiport            2496  0
iptable_filter          2244  1
piix                    5668  2
ide_pci_generic         3624  0
e1000                 103580  0

Target 0 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 1 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 2 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
        Goal: 40.000MB/s transfers (20.000MHz, 16bit)
        Curr: 40.000MB/s transfers (20.000MHz, 16bit)
        Channel A Target 2 Lun 0 Settings
                Commands Queued 2314
                Commands Active 0
                Command Openings 32
                Max Tagged Openings 32
                Device Queue Frozen Count 0
Target 3 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 4 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
        Goal: 40.000MB/s transfers (20.000MHz, 16bit)
        Curr: 40.000MB/s transfers (20.000MHz, 16bit)
        Channel A Target 4 Lun 0 Settings
                Commands Queued 2260
                Commands Active 0
                Command Openings 32
                Max Tagged Openings 32
                Device Queue Frozen Count 0
Target 5 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 6 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 7 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 8 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 9 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 10 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 11 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 12 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 13 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 14 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)
Target 15 Negotiation Settings
        User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS, 16bit)

[kontroler]---[dysk,lub wolne złącze]---[dysk, lub wolne złącze]---[dysk, lub wolne złącze]---[terminator]