Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2012-03-23 19:07:44
urbinek - 
Dzban Naczelny
problem z Xami po upgrade systemu
otóż, zaktualizowałem wczoraj system i wszystko zaczęło sie wykraczać przy aplikacjach korzystających z karty graficznej
mianowicie Xy się zatrzymują, proces idzie na 108% i zdechło (pozostałe usługi działają)
tak samo smplayer czy nawet jak włącze operę (ale to czasem...)
Kod:
urbinek@haruko:~$ uname -a Linux haruko 3.2.0-2-686-pae #1 SMP Tue Mar 20 19:48:26 UTC 2012 i686 GNU/Linux
Kod:
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.12-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Tue Mar 20 19:48:26 UTC 2012 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable) [ 0.000000] BIOS-e820: 00000000bffd0000 - 00000000bffde000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffde000 - 00000000c0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: MSI MS-7270/MS-7270, BIOS V1.9 04/11/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 0100000000 mask FFC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000140000000 aka 5120M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000 [ 0.000000] RAMDISK: 36d14000 - 37682000 [ 0.000000] ACPI: RSDP 000f8ad0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT bffd0000 0003C (v01 A M I OEMRSDT 04000811 MSFT 00000097) [ 0.000000] ACPI: FACP bffd0200 00084 (v02 A M I OEMFACP 04000811 MSFT 00000097) [ 0.000000] ACPI: DSDT bffd0440 047F2 (v01 1ADIJ 1ADIJ000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS bffde000 00040 [ 0.000000] ACPI: APIC bffd0390 00068 (v01 A M I OEMAPIC 04000811 MSFT 00000097) [ 0.000000] ACPI: MCFG bffd0400 0003C (v01 A M I OEMMCFG 04000811 MSFT 00000097) [ 0.000000] ACPI: SSDT bffd4c40 0002B (v01 OEM_ID OEMTBLID 00000001 INTL 02002026) [ 0.000000] ACPI: OEMB bffde040 00056 (v01 A M I AMI_OEM 04000811 MSFT 00000097) [ 0.000000] ACPI: SSDT bffd4c70 002CC (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4230MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffd0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048415 [ 0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map f4514200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8461 pages used for memmap [ 0.000000] HighMem zone: 812229 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 24-44 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 61 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3f780000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f4200000 s33024 r0 d24320 u1048576 [ 0.000000] pcpu-alloc: s33024 r0 d24320 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038174 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=9ef41d62-51b4-459a-8268-f18b43ab53ba ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:00140000) [ 0.000000] Memory: 4136816k/5242880k available (2840k kernel code, 56844k reserved, 1372k data, 412k init, 3282760k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc141e000 - 0xc1485000 ( 412 kB) [ 0.000000] .data : 0xc12c62ac - 0xc141d600 (1372 kB) [ 0.000000] .text : 0xc1000000 - 0xc12c62ac (2840 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f3c06000 soft=f3c08000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2814.125 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.25 BogoMIPS (lpj=11256500) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004049] Security Framework initialized [ 0.004054] AppArmor: AppArmor disabled by boot time parameter [ 0.004070] Mount-cache hash table entries: 512 [ 0.004189] Initializing cgroup subsys cpuacct [ 0.004194] Initializing cgroup subsys memory [ 0.004204] Initializing cgroup subsys devices [ 0.004207] Initializing cgroup subsys freezer [ 0.004209] Initializing cgroup subsys net_cls [ 0.004212] Initializing cgroup subsys blkio [ 0.004219] Initializing cgroup subsys perf_event [ 0.004246] CPU: Physical Processor ID: 0 [ 0.004248] CPU: Processor Core ID: 0 [ 0.004251] mce: CPU supports 5 MCE banks [ 0.004259] using AMD E400 aware idle routine [ 0.004477] ACPI: Core revision 20110623 [ 0.009732] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.010619] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050359] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ stepping 02 [ 0.052002] Performance Events: AMD PMU driver. [ 0.052002] ... version: 0 [ 0.052002] ... bit width: 48 [ 0.052002] ... generic registers: 4 [ 0.052002] ... value mask: 0000ffffffffffff [ 0.052002] ... max period: 00007fffffffffff [ 0.052002] ... fixed-purpose events: 0 [ 0.052002] ... event mask: 000000000000000f [ 0.052002] NMI watchdog enabled, takes one hw-pmu counter. [ 0.052002] CPU 1 irqstacks, hard=f3c94000 soft=f3c96000 [ 0.052002] Booting Node 0, Processors #1 Ok. [ 0.052002] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.136141] NMI watchdog enabled, takes one hw-pmu counter. [ 0.136158] Brought up 2 CPUs [ 0.136160] Total of 2 processors activated (11256.77 BogoMIPS). [ 0.136686] devtmpfs: initialized [ 0.136686] PM: Registering ACPI NVS region at bffde000 (139264 bytes) [ 0.136686] print_constraints: dummy: [ 0.136686] NET: Registered protocol family 16 [ 0.136686] node 0 link 0: io port [1000, ffffff] [ 0.136686] TOM: 00000000c0000000 aka 3072M [ 0.136686] node 0 link 0: mmio [a0000, bffff] [ 0.136686] node 0 link 0: mmio [c0000000, ffffffff] [ 0.136686] TOM2: 0000000140000000 aka 5120M [ 0.136686] bus: [00, ff] on node 0 link 0 [ 0.136686] bus: 00 index 0 [io 0x0000-0xffff] [ 0.136686] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.136686] bus: 00 index 2 [mem 0xc0000000-0xffffffff] [ 0.136686] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] [ 0.136686] ACPI: bus type pci registered [ 0.136686] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.136686] PCI: not using MMCONFIG [ 0.136855] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX. [ 0.136913] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.136915] PCI: Using configuration type 1 for base access [ 0.137420] bio: create slab <bio-0> at 0 [ 0.137420] ACPI: Added _OSI(Module Device) [ 0.137420] ACPI: Added _OSI(Processor Device) [ 0.137420] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.137420] ACPI: Added _OSI(Processor Aggregator Device) [ 0.137420] ACPI: EC: Look up EC in DSDT [ 0.140065] ACPI: Executed 1 blocks of module-level executable AML code [ 0.141554] ACPI: Interpreter enabled [ 0.141558] ACPI: (supports S0 S1 S4 S5) [ 0.141572] ACPI: Using IOAPIC for interrupt routing [ 0.141942] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.142837] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.142839] PCI: Using MMCONFIG for extended config space [ 0.147137] ACPI: No dock devices found. [ 0.147138] HEST: Table not found. [ 0.147142] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.147191] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.147303] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.147306] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.147308] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.147311] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.147313] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff] [ 0.147328] pci 0000:00:00.0: [10b9:1697] type 0 class 0x000600 [ 0.147383] pci 0000:00:01.0: [10b9:524b] type 1 class 0x000604 [ 0.147418] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.147421] pci 0000:00:01.0: PME# disabled [ 0.147436] pci 0000:00:02.0: [10b9:524c] type 1 class 0x000604 [ 0.147469] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.147473] pci 0000:00:02.0: PME# disabled [ 0.147487] pci 0000:00:03.0: [10b9:524d] type 1 class 0x000604 [ 0.147521] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.147524] pci 0000:00:03.0: PME# disabled [ 0.147538] pci 0000:00:04.0: [10b9:524e] type 1 class 0x000604 [ 0.147572] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.147575] pci 0000:00:04.0: PME# disabled [ 0.147599] pci 0000:00:11.0: [10b9:5249] type 1 class 0x000604 [ 0.147625] pci 0000:00:12.0: [10b9:5263] type 0 class 0x000200 [ 0.147636] pci 0000:00:12.0: reg 10: [io 0xc800-0xc8ff] [ 0.147643] pci 0000:00:12.0: reg 14: [mem 0xd7fefc00-0xd7fefcff] [ 0.147682] pci 0000:00:12.0: PME# supported from D3hot D3cold [ 0.147685] pci 0000:00:12.0: PME# disabled [ 0.147695] pci 0000:00:13.0: [10b9:5237] type 0 class 0x000c03 [ 0.147705] pci 0000:00:13.0: reg 10: [mem 0xd7fee000-0xd7feefff] [ 0.147744] pci 0000:00:13.1: [10b9:5237] type 0 class 0x000c03 [ 0.147753] pci 0000:00:13.1: reg 10: [mem 0xd7fed000-0xd7fedfff] [ 0.147793] pci 0000:00:13.2: [10b9:5237] type 0 class 0x000c03 [ 0.147802] pci 0000:00:13.2: reg 10: [mem 0xd7fec000-0xd7fecfff] [ 0.147845] pci 0000:00:13.3: [10b9:5239] type 0 class 0x000c03 [ 0.147858] pci 0000:00:13.3: reg 10: [mem 0xd7fef800-0xd7fef8ff] [ 0.147906] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold [ 0.147910] pci 0000:00:13.3: PME# disabled [ 0.147927] pci 0000:00:15.0: [10b9:1573] type 0 class 0x000601 [ 0.147990] pci 0000:00:15.1: [10b9:7101] type 0 class 0x000680 [ 0.148059] pci 0000:00:15.1: quirk: [io 0x4000-0x403f] claimed by ali7101 ACPI [ 0.148082] pci 0000:00:16.0: [10b9:5229] type 0 class 0x000101 [ 0.148111] pci 0000:00:16.0: reg 20: [io 0xff00-0xff0f] [ 0.148148] pci 0000:00:16.1: [10b9:5288] type 0 class 0x000101 [ 0.148159] pci 0000:00:16.1: reg 10: [io 0xc400-0xc407] [ 0.148166] pci 0000:00:16.1: reg 14: [io 0xc000-0xc003] [ 0.148173] pci 0000:00:16.1: reg 18: [io 0xb800-0xb807] [ 0.148180] pci 0000:00:16.1: reg 1c: [io 0xb400-0xb403] [ 0.148187] pci 0000:00:16.1: reg 20: [io 0xb000-0xb00f] [ 0.148194] pci 0000:00:16.1: reg 24: [mem 0xd7fef400-0xd7fef7ff] [ 0.148216] pci 0000:00:16.1: PME# supported from D3hot [ 0.148220] pci 0000:00:16.1: PME# disabled [ 0.148236] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.148251] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.148265] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.148279] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.148332] pci 0000:01:00.0: [10de:0614] type 0 class 0x000300 [ 0.148342] pci 0000:01:00.0: reg 10: [mem 0xdb000000-0xdbffffff] [ 0.148353] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.148363] pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xd9ffffff 64bit] [ 0.148371] pci 0000:01:00.0: reg 24: [io 0xd800-0xd87f] [ 0.148378] pci 0000:01:00.0: reg 30: [mem 0xdafe0000-0xdaffffff pref] [ 0.156020] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.156023] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.156026] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff] [ 0.156029] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref] [ 0.156052] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.156078] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.156103] pci 0000:00:04.0: PCI bridge to [bus 04-04] [ 0.156133] pci 0000:05:0b.0: [1102:0004] type 0 class 0x000401 [ 0.156147] pci 0000:05:0b.0: reg 10: [io 0xe800-0xe81f] [ 0.156209] pci 0000:05:0b.0: supports D1 D2 [ 0.156225] pci 0000:05:0b.1: [1102:7003] type 0 class 0x000980 [ 0.156238] pci 0000:05:0b.1: reg 10: [io 0xe400-0xe407] [ 0.156300] pci 0000:05:0b.1: supports D1 D2 [ 0.156323] pci 0000:05:0c.0: [14f1:8800] type 0 class 0x000400 [ 0.156339] pci 0000:05:0c.0: reg 10: [mem 0xdd000000-0xddffffff] [ 0.156420] pci 0000:05:0c.1: [14f1:8801] type 0 class 0x000480 [ 0.156434] pci 0000:05:0c.1: reg 10: [mem 0xdc000000-0xdcffffff] [ 0.156524] pci 0000:00:11.0: PCI bridge to [bus 05-05] [ 0.156527] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 0.156531] pci 0000:00:11.0: bridge window [mem 0xdc000000-0xddffffff] [ 0.156544] pci_bus 0000:00: on NUMA node 0 [ 0.156546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.156597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT] [ 0.156664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT] [ 0.156692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT] [ 0.156717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT] [ 0.156742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB4._PRT] [ 0.156771] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.156774] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.156776] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.159662] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.159726] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.159789] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.159852] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.159914] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.159977] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.160052] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled. [ 0.160114] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled. [ 0.160178] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.160262] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.160262] vgaarb: loaded [ 0.160262] vgaarb: bridge control possible 0000:01:00.0 [ 0.160262] PCI: Using ACPI for IRQ routing [ 0.160262] PCI: pci_cache_line_size set to 64 bytes [ 0.160262] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.160262] reserve RAM buffer: 00000000bffd0000 - 00000000bfffffff [ 0.161815] pnp: PnP ACPI init [ 0.161833] ACPI: bus type pnp registered [ 0.161917] pnp 00:00: [bus 00-ff] [ 0.161919] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.161922] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.161924] pnp 00:00: [io 0x0d00-0xffff window] [ 0.161926] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.161929] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.161931] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 0.161982] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.161995] pnp 00:01: [dma 4] [ 0.161997] pnp 00:01: [io 0x0000-0x000f] [ 0.161999] pnp 00:01: [io 0x0081-0x0083] [ 0.162001] pnp 00:01: [io 0x0087] [ 0.162003] pnp 00:01: [io 0x0089-0x008b] [ 0.162005] pnp 00:01: [io 0x008f] [ 0.162007] pnp 00:01: [io 0x00c0-0x00df] [ 0.162028] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.162037] pnp 00:02: [io 0x0070-0x0071] [ 0.162050] pnp 00:02: [irq 8] [ 0.162073] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.162080] pnp 00:03: [io 0x0061] [ 0.162102] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.162109] pnp 00:04: [io 0x00f0-0x00ff] [ 0.162118] pnp 00:04: [irq 13] [ 0.162141] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.162342] pnp 00:05: [io 0x03f8-0x03ff] [ 0.162352] pnp 00:05: [irq 4] [ 0.162354] pnp 00:05: [dma 0 disabled] [ 0.162411] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.162594] pnp 00:06: [io 0x02f8-0x02ff] [ 0.162602] pnp 00:06: [irq 3] [ 0.162605] pnp 00:06: [dma 0 disabled] [ 0.162684] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.163003] pnp 00:07: [io 0x0378-0x037f] [ 0.163012] pnp 00:07: [irq 7] [ 0.163014] pnp 00:07: [dma 0 disabled] [ 0.163116] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.163348] pnp 00:08: [io 0x0010-0x001f] [ 0.163350] pnp 00:08: [io 0x0022-0x003f] [ 0.163352] pnp 00:08: [io 0x0044-0x005f] [ 0.163354] pnp 00:08: [io 0x0062-0x0063] [ 0.163356] pnp 00:08: [io 0x0065-0x006f] [ 0.163358] pnp 00:08: [io 0x0072-0x007f] [ 0.163360] pnp 00:08: [io 0x0080] [ 0.163362] pnp 00:08: [io 0x0084-0x0086] [ 0.163363] pnp 00:08: [io 0x0088] [ 0.163365] pnp 00:08: [io 0x008c-0x008e] [ 0.163367] pnp 00:08: [io 0x0090-0x009f] [ 0.163369] pnp 00:08: [io 0x00a2-0x00bf] [ 0.163371] pnp 00:08: [io 0x00e0-0x00ef] [ 0.163373] pnp 00:08: [io 0x04d0-0x04d1] [ 0.163375] pnp 00:08: [io 0x4000-0x40bf] [ 0.163377] pnp 00:08: [io 0x40c0-0x40df] [ 0.163379] pnp 00:08: [io 0x0400-0x040f] [ 0.163381] pnp 00:08: [io 0x0480-0x048f] [ 0.163383] pnp 00:08: [mem 0xffb00000-0xffb7ffff] [ 0.163386] pnp 00:08: [mem 0xfff80000-0xffffffff] [ 0.163388] pnp 00:08: [mem 0xfec10000-0xfec10fff] [ 0.163390] pnp 00:08: [mem 0xfec20000-0xfec20fff] [ 0.163392] pnp 00:08: [mem 0xfe000000-0xfe0000ff] [ 0.163458] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.163461] system 00:08: [io 0x4000-0x40bf] could not be reserved [ 0.163463] system 00:08: [io 0x40c0-0x40df] has been reserved [ 0.163466] system 00:08: [io 0x0400-0x040f] has been reserved [ 0.163471] system 00:08: [io 0x0480-0x048f] has been reserved [ 0.163474] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.163477] system 00:08: [mem 0xfff80000-0xffffffff] has been reserved [ 0.163480] system 00:08: [mem 0xfec10000-0xfec10fff] could not be reserved [ 0.163482] system 00:08: [mem 0xfec20000-0xfec20fff] has been reserved [ 0.163485] system 00:08: [mem 0xfe000000-0xfe0000ff] has been reserved [ 0.163488] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.163535] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 0.163538] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.163540] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.163580] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.163583] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.163586] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.163588] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.163675] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] [ 0.163678] pnp 00:0a: [io 0x0a00-0x0a0f] [ 0.163680] pnp 00:0a: [io 0x0a10-0x0a1f] [ 0.163718] system 00:0a: [io 0x0a00-0x0a0f] has been reserved [ 0.163721] system 00:0a: [io 0x0a10-0x0a1f] has been reserved [ 0.163723] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.164023] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 0.164061] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.164064] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.164179] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.164181] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.164184] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.164186] pnp 00:0c: [mem 0x00100000-0xbfffffff] [ 0.164188] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.164234] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.164237] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.164240] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.164243] system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.164246] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.164352] pnp: PnP ACPI: found 13 devices [ 0.164353] ACPI: ACPI bus type pnp unregistered [ 0.164356] PnPBIOS: Disabled by ACPI PNP [ 0.200704] Switching to clocksource acpi_pm [ 0.200724] PCI: max bus depth: 1 pci_try_num: 2 [ 0.200739] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.200742] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.200746] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff] [ 0.200749] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref] [ 0.200753] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.200759] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.200764] pci 0000:00:04.0: PCI bridge to [bus 04-04] [ 0.200770] pci 0000:00:11.0: PCI bridge to [bus 05-05] [ 0.200773] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 0.200777] pci 0000:00:11.0: bridge window [mem 0xdc000000-0xddffffff] [ 0.200793] pci 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 [ 0.200797] pci 0000:00:01.0: setting latency timer to 64 [ 0.200804] pci 0000:00:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [ 0.200807] pci 0000:00:02.0: setting latency timer to 64 [ 0.200814] pci 0000:00:03.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39 [ 0.200817] pci 0000:00:03.0: setting latency timer to 64 [ 0.200824] pci 0000:00:04.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 [ 0.200827] pci 0000:00:04.0: setting latency timer to 64 [ 0.200831] pci 0000:00:11.0: setting latency timer to 64 [ 0.200835] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.200837] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.200839] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.200841] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.200844] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff] [ 0.200846] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.200848] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xdbffffff] [ 0.200851] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref] [ 0.200854] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.200856] pci_bus 0000:05: resource 1 [mem 0xdc000000-0xddffffff] [ 0.200911] NET: Registered protocol family 2 [ 0.200968] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.201221] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.201694] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.201918] TCP: Hash tables configured (established 131072 bind 65536) [ 0.201920] TCP reno registered [ 0.201923] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.201931] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.202022] NET: Registered protocol family 1 [ 0.202044] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.202063] pci 0000:00:01.0: Enabling HT MSI Mapping [ 0.202080] pci 0000:00:02.0: Enabling HT MSI Mapping [ 0.202097] pci 0000:00:03.0: Enabling HT MSI Mapping [ 0.202114] pci 0000:00:04.0: Enabling HT MSI Mapping [ 0.202142] pci 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.700027] pci 0000:00:13.0: PCI INT A disabled [ 0.700053] pci 0000:00:13.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.780017] pci 0000:00:13.1: PCI INT B disabled [ 0.780031] pci 0000:00:13.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.860016] pci 0000:00:13.2: PCI INT C disabled [ 0.860035] pci 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.860046] pci 0000:00:13.3: PCI INT D disabled [ 0.860063] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.860077] pci 0000:01:00.0: Boot video device [ 0.860124] Unpacking initramfs... [ 1.078964] Freeing initrd memory: 9656k freed [ 1.083340] audit: initializing netlink socket (disabled) [ 1.083356] type=2000 audit(1332529138.080:1): initialized [ 1.104095] highmem bounce pool size: 64 pages [ 1.104099] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.120094] VFS: Disk quotas dquot_6.5.2 [ 1.120123] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.120182] msgmni has been set to 1686 [ 1.120354] alg: No test for stdrng (krng) [ 1.120388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.120391] io scheduler noop registered [ 1.120393] io scheduler deadline registered [ 1.120409] io scheduler cfq registered (default) [ 1.120486] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.120513] pcieport 0000:00:01.0: irq 61 for MSI/MSI-X [ 1.120556] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.120575] pcieport 0000:00:02.0: irq 62 for MSI/MSI-X [ 1.120610] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.120630] pcieport 0000:00:03.0: irq 63 for MSI/MSI-X [ 1.120665] pcieport 0000:00:04.0: setting latency timer to 64 [ 1.120687] pcieport 0000:00:04.0: irq 64 for MSI/MSI-X [ 1.120756] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.120781] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.120783] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.120969] vesafb: mode is 1680x1050x32, linelength=6720, pages=0 [ 1.120971] vesafb: scrolling: redraw [ 1.120973] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.121704] vesafb: framebuffer at 0xd9000000, mapped to 0xf8280000, using 6912k, total 6912k [ 1.464125] Console: switching to colour frame buffer device 210x65 [ 1.803330] fb0: VESA VGA frame buffer device [ 1.803388] ERST: Table is not found! [ 1.803389] GHES: HEST is not enabled! [ 1.803406] isapnp: Scanning for PnP cards... [ 2.113659] isapnp: No Plug & Play device found [ 2.113727] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.134084] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.154490] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.176538] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.208425] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.224206] Linux agpgart interface v0.103 [ 2.224524] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.227020] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.227025] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.227157] mousedev: PS/2 mouse device common for all mice [ 2.227194] rtc_cmos 00:02: RTC can wake from S4 [ 2.227285] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.227315] rtc0: alarms up to one month, 114 bytes nvram [ 2.227325] cpuidle: using governor ladder [ 2.227327] cpuidle: using governor menu [ 2.227527] TCP cubic registered [ 2.227564] NET: Registered protocol family 10 [ 2.228034] Mobile IPv6 [ 2.228037] NET: Registered protocol family 17 [ 2.228041] Registering the dns_resolver key type [ 2.228056] Using IPI No-Shortcut mode [ 2.228168] PM: Hibernation image not present or could not be loaded. [ 2.228177] registered taskstats version 1 [ 2.236300] rtc_cmos 00:02: setting system clock to 2012-03-23 18:58:59 UTC (1332529139) [ 2.236333] Initializing network drop monitor service [ 2.236428] Freeing unused kernel memory: 412k freed [ 2.236628] Write protecting the kernel text: 2844k [ 2.236655] Write protecting the kernel read-only data: 1112k [ 2.236657] NX-protecting the kernel data: 3300k [ 2.250554] udevd[50]: starting version 175 [ 2.273975] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 2.274018] uli526x 0000:00:12.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.298497] usbcore: registered new interface driver usbfs [ 2.298523] usbcore: registered new interface driver hub [ 2.310711] SCSI subsystem initialized [ 2.323527] uli526x 0000:00:12.0: eth0: ULi M5263 at pci0000:00:12.0, 00:16:17:93:32:15, irq 20 [ 2.323753] libata version 3.00 loaded. [ 2.324044] pata_ali 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.324393] scsi0 : pata_ali [ 2.324618] scsi1 : pata_ali [ 2.325115] usbcore: registered new device driver usb [ 2.325567] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.325570] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.325643] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.325668] ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.325684] ehci_hcd 0000:00:13.3: EHCI Host Controller [ 2.325705] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 1 [ 2.325730] ehci_hcd 0000:00:13.3: debug port 1 [ 2.348053] ehci_hcd 0000:00:13.3: irq 23, io mem 0xd7fef800 [ 2.360023] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00 [ 2.360044] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.360047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.360049] usb usb1: Product: EHCI Host Controller [ 2.360051] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd [ 2.360053] usb usb1: SerialNumber: 0000:00:13.3 [ 2.360166] hub 1-0:1.0: USB hub found [ 2.360170] hub 1-0:1.0: 8 ports detected [ 2.432649] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.432675] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.432692] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.432703] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 2.432737] ohci_hcd 0000:00:13.0: irq 17, io mem 0xd7fee000 [ 2.488275] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-H44N, RB01, max UDMA/66 [ 2.488279] ata1.01: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 2.488281] ata1.01: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 2.490268] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.490271] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.490273] usb usb2: Product: OHCI Host Controller [ 2.490275] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd [ 2.490277] usb usb2: SerialNumber: 0000:00:13.0 [ 2.490398] hub 2-0:1.0: USB hub found [ 2.490404] hub 2-0:1.0: 3 ports detected [ 2.490471] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 2.490481] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.490487] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 2.490512] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd7fed000 [ 2.504185] ata1.01: configured for UDMA/66 [ 2.512416] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H44N RB01 PQ: 0 ANSI: 5 [ 2.546020] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.546023] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.546025] usb usb3: Product: OHCI Host Controller [ 2.546027] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd [ 2.546029] usb usb3: SerialNumber: 0000:00:13.1 [ 2.546136] hub 3-0:1.0: USB hub found [ 2.546142] hub 3-0:1.0: 3 ports detected [ 2.546204] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 2.546215] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 2.546221] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 2.546248] ohci_hcd 0000:00:13.2: irq 19, io mem 0xd7fec000 [ 2.602017] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.602020] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.602022] usb usb4: Product: OHCI Host Controller [ 2.602024] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd [ 2.602026] usb usb4: SerialNumber: 0000:00:13.2 [ 2.602125] hub 4-0:1.0: USB hub found [ 2.602130] hub 4-0:1.0: 3 ports detected [ 2.668512] ahci 0000:00:16.1: version 3.0 [ 2.668525] ahci 0000:00:16.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.668616] ahci 0000:00:16.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 2.668619] ahci 0000:00:16.1: flags: ncq sntf ilck pm led clo pmp pio slum part [ 2.670248] scsi2 : ahci [ 2.671599] scsi3 : ahci [ 2.671708] scsi4 : ahci [ 2.671781] scsi5 : ahci [ 2.671881] ata3: SATA max UDMA/133 abar m1024@0xd7fef400 port 0xd7fef500 irq 21 [ 2.671884] ata4: SATA max UDMA/133 abar m1024@0xd7fef400 port 0xd7fef580 irq 21 [ 2.671887] ata5: SATA max UDMA/133 abar m1024@0xd7fef400 port 0xd7fef600 irq 21 [ 2.671889] ata6: SATA max UDMA/133 abar m1024@0xd7fef400 port 0xd7fef680 irq 21 [ 2.992029] ata5: SATA link down (SStatus 0 SControl 300) [ 2.992066] ata6: SATA link down (SStatus 0 SControl 300) [ 3.008021] usb 1-8: new high-speed USB device number 6 using ehci_hcd [ 3.140355] usb 1-8: New USB device found, idVendor=0424, idProduct=2504 [ 3.140357] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.140510] hub 1-8:1.0: USB hub found [ 3.140602] hub 1-8:1.0: 2 ports detected [ 3.160025] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.161359] ata4.00: ATA-8: WDC WD2500BEVT-60A23T0, 01.01A01, max UDMA/100 [ 3.161363] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.162374] ata4.00: configured for UDMA/100 [ 3.164020] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.169676] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133 [ 3.169678] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.175374] ata3.00: configured for UDMA/133 [ 3.175498] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5 [ 3.175678] scsi 3:0:0:0: Direct-Access ATA WDC WD2500BEVT-6 01.0 PQ: 0 ANSI: 5 [ 3.180636] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.180675] sd 2:0:0:0: [sda] Write Protect is off [ 3.180677] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.180693] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.180973] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.181007] sd 3:0:0:0: [sdb] Write Protect is off [ 3.181009] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.181024] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.204173] sda: sda1 sda2 sda3 sda4 < sda5 > [ 3.204578] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.444017] usb 4-1: new full-speed USB device number 2 using ohci_hcd [ 3.484132] sdb: sdb1 sdb2 sdb3 [ 3.484395] sd 3:0:0:0: [sdb] Attached SCSI disk [ 3.490493] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.490497] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.490628] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 3.659077] usb 4-1: New USB device found, idVendor=03f0, idProduct=0317 [ 3.659081] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.659084] usb 4-1: Product: HP LaserJet 1200 [ 3.659086] usb 4-1: Manufacturer: HewLett Packard [ 3.659087] usb 4-1: SerialNumber: 00CNDP086970 [ 3.836024] usb 3-1: new full-speed USB device number 2 using ohci_hcd [ 4.048095] usb 3-1: New USB device found, idVendor=09da, idProduct=0080 [ 4.048099] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.048101] usb 3-1: Product: USB Mouse [ 4.048103] usb 3-1: Manufacturer: A4Tech [ 4.063362] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input0 [ 4.063434] generic-usb 0003:09DA:0080.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Mouse] on usb-0000:00:13.1-1/input0 [ 4.063452] usbcore: registered new interface driver usbhid [ 4.063453] usbhid: USB HID core driver [ 4.104204] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.356021] usb 3-2: new low-speed USB device number 3 using ohci_hcd [ 4.570110] usb 3-2: New USB device found, idVendor=413c, idProduct=2003 [ 4.570114] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.570117] usb 3-2: Product: Dell USB Keyboard [ 4.570119] usb 3-2: Manufacturer: Dell [ 4.581353] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input1 [ 4.581408] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.1-2/input0 [ 4.884022] usb 3-3: new low-speed USB device number 4 using ohci_hcd [ 5.192132] usb 3-3: New USB device found, idVendor=051d, idProduct=0002 [ 5.192143] usb 3-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 5.192146] usb 3-3: Product: Back-UPS CS 500 FW:808.q3.I USB FW:q3 [ 5.192148] usb 3-3: Manufacturer: American Power Conversion [ 5.192150] usb 3-3: SerialNumber: BB0430014311 [ 5.375136] udevd[274]: starting version 175 [ 5.968818] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 5.968825] ACPI: Power Button [PWRB] [ 5.968883] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 5.968886] ACPI: Power Button [PWRF] [ 6.048843] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 6.053780] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 6.076480] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.093540] ACPI: duty_cycle spans bit 4 [ 6.256677] ali1535_smbus 0000:00:15.1: ALI1535_smb region uninitialized - upgrade BIOS? [ 6.256681] ali1535_smbus 0000:00:15.1: ALI1535 not detected, module not inserted. [ 6.323902] Linux media interface: v0.10 [ 6.329703] gameport gameport0: EMU10K1 is pci0000:05:0b.1/gameport0, io 0xe400, speed 962kHz [ 6.330835] ali15x3_smbus 0000:00:15.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr [ 6.333820] ali15x3_smbus 0000:00:15.1: ALI15X3 not detected, module not inserted. [ 6.377480] parport_pc 00:07: reported by Plug and Play ACPI [ 6.377528] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 6.406772] alim7101_wdt: Steve Hill <steve@navaho.co.uk>. [ 6.406785] alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set [ 6.435264] Linux video capture interface: v2.00 [ 6.717426] generic-usb 0003:051D:0002.0003: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q3.I USB FW:q3] on usb-0000:00:13.1-3/input0 [ 6.907266] IR NEC protocol handler initialized [ 6.957519] nvidia: module license 'NVIDIA' taints kernel. [ 6.957523] Disabling lock debugging due to kernel taint [ 6.977545] IR RC5(x) protocol handler initialized [ 7.964130] nvidia 0000:01:00.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25 [ 7.964141] nvidia 0000:01:00.0: setting latency timer to 64 [ 7.964145] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 7.964355] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.20 Mon Feb 6 20:25:38 PST 2012 [ 7.972082] IR RC6 protocol handler initialized [ 8.012529] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded [ 8.012560] cx8800 0000:05:0c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 8.014287] cx88[0]: subsystem: 107d:6618, board: Leadtek TV2000 XP Global [card=61,autodetected], frontend(s): 0 [ 8.014290] cx88[0]: TV tuner type 71, Radio tuner type -1 [ 8.076264] IR JVC protocol handler initialized [ 8.108532] cx2388x alsa driver version 0.0.9 loaded [ 8.116406] IR Sony protocol handler initialized [ 8.160192] IR MCE Keyboard/mouse protocol handler initialized [ 8.316543] lirc_dev: IR Remote Control driver registered, major 250 [ 8.320871] IR LIRC bridge handler initialized [ 8.343606] i2c-core: driver [tuner] using legacy suspend method [ 8.343609] i2c-core: driver [tuner] using legacy resume method [ 8.346782] tuner 0-0061: Tuner -1 found with type(s) Radio TV. [ 9.123172] xc2028 0-0061: creating new instance [ 9.123176] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner [ 9.123179] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [ 9.168019] Registered IR keymap rc-winfast [ 9.168119] input: cx88 IR (Leadtek TV2000 XP Glob as /devices/pci0000:00/0000:00:11.0/0000:05:0c.0/rc/rc0/input5 [ 9.168177] rc0: cx88 IR (Leadtek TV2000 XP Glob as /devices/pci0000:00/0000:00:11.0/0000:05:0c.0/rc/rc0 [ 9.168183] cx88[0]/0: found at 0000:05:0c.0, rev: 5, irq: 20, latency: 64, mmio: 0xdd000000 [ 9.277181] xc2028 0-0061: Error: firmware xc3028-v27.fw not found. [ 9.279143] cx88[0]/0: registered device video0 [v4l2] [ 9.279199] cx88[0]/0: registered device vbi0 [ 9.279261] cx88[0]/0: registered device radio0 [ 9.279324] snd_emu10k1 0000:05:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 9.283248] Installing spdif_bug patch: SB Audigy 1 ES [SB0160] [ 9.298325] cx88_audio 0000:05:0c.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 9.298357] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 9.305723] xc2028 0-0061: Error: firmware xc3028-v27.fw not found. [ 9.308583] xc2028 0-0061: Error on line 1210: -6 [ 9.310804] xc2028 0-0061: Error on line 1210: -6 [ 10.078328] usblp1: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317 [ 10.078349] usbcore: registered new interface driver usblp [ 11.868610] Adding 2930684k swap on /dev/sdb1. Priority:-1 extents:1 across:2930684k [ 11.873087] EXT4-fs (sda1): re-mounted. Opts: (null) [ 12.493836] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.585694] loop: module loaded [ 12.612329] w83627ehf: Found W83627EHG chip at 0xa10 [ 13.793359] kjournald starting. Commit interval 5 seconds [ 13.793613] EXT3-fs (sda2): using internal journal [ 13.793617] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 13.821654] REISERFS (device sda3): found reiserfs format "3.6" with standard journal [ 13.821661] REISERFS (device sda3): using ordered data mode [ 13.821663] reiserfs: using flush barriers [ 13.821837] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 13.822303] REISERFS (device sda3): checking transaction log (sda3) [ 13.899977] REISERFS (device sda3): Using r5 hash to sort names [ 13.924249] REISERFS (device sda5): found reiserfs format "3.6" with standard journal [ 13.924280] REISERFS (device sda5): using ordered data mode [ 13.924282] reiserfs: using flush barriers [ 13.924507] REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 13.924949] REISERFS (device sda5): checking transaction log (sda5) [ 14.022818] REISERFS (device sda5): Using r5 hash to sort names [ 14.260279] fuse init (API version 7.17) [ 15.654304] RPC: Registered named UNIX socket transport module. [ 15.654308] RPC: Registered udp transport module. [ 15.654310] RPC: Registered tcp transport module. [ 15.654311] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.694487] FS-Cache: Loaded [ 15.744915] FS-Cache: Netfs 'nfs' registered for caching [ 15.767826] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.899501] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.904357] uli526x 0000:00:12.0: eth0: NIC Link is Up 100 Mbps Full duplex [ 18.904627] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.119883] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6 [ 22.039985] apm: BIOS not found. [ 24.096379] input: btnx keyboard as /devices/virtual/input/input7 [ 24.096521] input: btnx mouse as /devices/virtual/input/input8 [ 24.395458] lp0: using parport0 (interrupt-driven). [ 24.492890] ppdev: user-space parallel port driver [ 29.520015] eth0: no IPv6 routers present [ 31.318110] usblp1: removed [ 31.342140] usblp1: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317 [ 32.841507] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ (2 cpu cores) (version 2.20.00) [ 32.841551] powernow-k8: fid 0x14 (2800 MHz), vid 0x9 [ 32.841553] powernow-k8: fid 0x12 (2600 MHz), vid 0xb [ 32.841555] powernow-k8: fid 0x10 (2400 MHz), vid 0xd [ 32.841556] powernow-k8: fid 0xe (2200 MHz), vid 0xf [ 32.841558] powernow-k8: fid 0xc (2000 MHz), vid 0x11 [ 32.841560] powernow-k8: fid 0xa (1800 MHz), vid 0x11 [ 32.841562] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 41.189287] vboxdrv: Found 2 processor cores. [ 41.189885] vboxdrv: fAsync=1 offMin=0x6f36 offMax=0x6f36 [ 41.190662] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 41.190669] vboxdrv: Successfully loaded version 4.1.8_Debian (interface 0x00190000). [ 41.244830] vboxpci: IOMMU not found (not registered) [ 42.149315] bttv: driver version 0.9.19 loaded [ 42.149324] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 53.864330] xc2028 0-0061: Error: firmware xc3028-v27.fw not found. [ 53.894275] xc2028 0-0061: Error on line 1210: -6 [ 53.898995] xc2028 0-0061: Error on line 1210: -6 [ 53.900620] xc2028 0-0061: Error on line 1210: -6 [ 85.679764] NVRM: GPU at 0000:01:00.0 has fallen off the bus. [ 85.679792] NVRM: os_pci_init_handle: invalid context! [ 85.679802] NVRM: os_pci_init_handle: invalid context! [ 85.679851] NVRM: os_pci_init_handle: invalid context! [ 85.679856] NVRM: os_pci_init_handle: invalid context! [ 86.631716] irq 25: nobody cared (try booting with the "irqpoll" option) [ 86.631723] Pid: 1327, comm: Xorg Tainted: P O 3.2.0-2-686-pae #1 [ 86.631725] Call Trace: [ 86.631733] [<c1078a21>] ? __report_bad_irq+0x1c/0x8d [ 86.631736] [<c1078c2b>] ? note_interrupt+0x122/0x18f [ 86.631739] [<c10775cb>] ? handle_irq_event_percpu+0x142/0x158 [ 86.631743] [<c10791de>] ? handle_level_irq+0x56/0x56 [ 86.631745] [<c1077602>] ? handle_irq_event+0x21/0x37 [ 86.631748] [<c10791de>] ? handle_level_irq+0x56/0x56 [ 86.631751] [<c107923e>] ? handle_fasteoi_irq+0x60/0x85 [ 86.631753] <IRQ> [<c100cdcf>] ? do_IRQ+0x2e/0x76 [ 86.631760] [<c12c57f0>] ? common_interrupt+0x30/0x38 [ 86.631762] handlers: [ 86.631932] [<f9dcadaf>] nv_kern_isr [ 86.631935] Disabling IRQ #25
jądro najnowsze ale na wcześniejszym 3.2.0-1-686-pae jest to samo
sterowniki najnowsze z repo testing ale i świeżo kompilowane ze stronki nie działają...
wyczytałem, że to cos z alokowaniem sterownika w pamięci > http://www.cyberciti.biz/faq/debian-ubuntu-rhel-fed … llen-off-bus/
wpisałem to ale nic nie pomogło...
wtf sie z tym dzieje ?
karta działa bo na win7 gram z powodzeniem wiec sprzet jest raczej ok...
A w wolnym czasie, robię noże :)
Offline
#2 2012-03-23 19:16:13
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: problem z Xami po upgrade systemu
Spróbuj kernela liquorix
Kod:
deb http://liquorix.net/debian sid main
U mnie Wheezy śmiga na nim.
Nvidia również.
Offline
#3 2012-03-23 19:18:36
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/random
- Zarejestrowany: 2008-01-07
Re: problem z Xami po upgrade systemu
Może przeinstaluj ster do grafy, nie wiem , jaki masz, bo dmesgu nie mam siły szukać, ale u mnie na jaju 3.2.12 Nvidia ze sterem 295.20 chodzi dobrze.
Ostatnio edytowany przez Jacekalex (2012-03-23 20:57:47)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#4 2012-03-23 19:41:53
urbinek - Dzban Naczelny
Re: problem z Xami po upgrade systemu
jernela zaraz zobacze
a sterowniki tak jak pisałem, najnowsze z repo i ze stronkui producenta
jeśli chodzi o dmesga chodzi mi konkretnie o
Kod:
[ 85.679764] NVRM: GPU at 0000:01:00.0 has fallen off the bus. [ 85.679792] NVRM: os_pci_init_handle: invalid context! [ 85.679802] NVRM: os_pci_init_handle: invalid context! [ 85.679851] NVRM: os_pci_init_handle: invalid context! [ 85.679856] NVRM: os_pci_init_handle: invalid context! [ 86.631716] irq 25: nobody cared (try booting with the "irqpoll" option) [ 86.631723] Pid: 1327, comm: Xorg Tainted: P O 3.2.0-2-686-pae #1 [ 86.631725] Call Trace: [ 86.631733] [<c1078a21>] ? __report_bad_irq+0x1c/0x8d [ 86.631736] [<c1078c2b>] ? note_interrupt+0x122/0x18f [ 86.631739] [<c10775cb>] ? handle_irq_event_percpu+0x142/0x158 [ 86.631743] [<c10791de>] ? handle_level_irq+0x56/0x56 [ 86.631745] [<c1077602>] ? handle_irq_event+0x21/0x37 [ 86.631748] [<c10791de>] ? handle_level_irq+0x56/0x56 [ 86.631751] [<c107923e>] ? handle_fasteoi_irq+0x60/0x85 [ 86.631753] <IRQ> [<c100cdcf>] ? do_IRQ+0x2e/0x76 [ 86.631760] [<c12c57f0>] ? common_interrupt+0x30/0x38 [ 86.631762] handlers: [ 86.631932] [<f9dcadaf>] nv_kern_isr [ 86.631935] Disabling IRQ #25
wtedy wszystko zdycha
na nowym jajku to samo...
nawet gorzej bo system wiesza się całkowicie, nawet pingi nie odpowiadają
A w wolnym czasie, robię noże :)
Offline
#5 2012-03-23 20:32:15
arturek - Członek DUG
- arturek
- Członek DUG
- Zarejestrowany: 2006-08-19
Re: problem z Xami po upgrade systemu
sprawdź czy nie dopadł cię problem SyncToVBlank
już słyszałem ze są z tym problemy
pierwszy post na NVIDIA Linux
http://www.nvnews.net/vbulletin/showthread.php?s=95 … &t=176815
Debian “trixie” Xfce
Offline
#6 2012-03-24 08:27:32
urbinek - Dzban Naczelny
#7 2012-03-24 14:08:42
urbinek - Dzban Naczelny
Re: problem z Xami po upgrade systemu
problem jest w sterowniku ale nie wiem o co chodzi, na nowym systemie mam to samo na sterowniku nvidi...
do tego, nie moge zainstalować już zadnej binarki ze strony
instalator zakańcza pracę z sygnałem SIGKILL
A w wolnym czasie, robię noże :)
Offline
#8 2012-03-24 14:41:25
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: problem z Xami po upgrade systemu
Jaką właściwie masz kartę graficzną ?
Offline
#9 2012-03-24 14:46:48
urbinek - Dzban Naczelny
#10 2012-03-24 15:09:59
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: problem z Xami po upgrade systemu
Wersja debiana ?
Offline
#11 2012-03-24 15:23:48
urbinek - Dzban Naczelny
Re: problem z Xami po upgrade systemu
najnowszy testing
wszystko się rozsypało jak zrobiłem upgrade 3 dni temu
wcześniej miałem NVIDIA-Linux-x86-275.43 (binarka od nvidi)
ale teraz nie mogę nawet zainstalować tego bo dostaje sigkill
wszystko jest ok dopóki nie uruchomię czegość co wymaga grafiki
A w wolnym czasie, robię noże :)
Offline
#12 2012-03-24 15:27:21
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/random
- Zarejestrowany: 2008-01-07
Re: problem z Xami po upgrade systemu
Jeśli coś daje binarce sigkill, to w syslogu lub messages powinien być ślad tego sigkilla.
Może jajo wstało z aktywnym np SELINUXEM, lub czymś podobnym?
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#13 2012-03-24 15:29:26
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: problem z Xami po upgrade systemu
Jak wygląda instalacja sterowników z repozytorium ?
Kod:
aptitude install nvidia-kernel-dkms
Offline
#14 2012-03-24 15:46:57
urbinek - Dzban Naczelny
Re: problem z Xami po upgrade systemu
Kod:
root@urbinek:/home/urbinek# apt-get install nvidia-kernel-dkms Czytanie list pakietów... Gotowe Budowanie drzewa zależności Odczyt informacji o stanie... Gotowe nvidia-kernel-dkms jest już w najnowszej wersji. nvidia-kernel-dkms zaznaczony jako zainstalowany ręcznie. 0 aktualizowanych, 0 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
Kod:
root@urbinek:/home/urbinek# dpkg -l | grep nvidia ii glx-alternative-nvidia 0.2.1 allows the selection of NVIDIA as GLX provider ii libgl1-nvidia-alternatives 295.20-1 transition libGL.so* diversions to glx-alternative-nvidia ii libgl1-nvidia-glx 295.20-1 NVIDIA binary OpenGL libraries ii libglx-nvidia-alternatives 295.20-1 transition libgl.so diversions to glx-alternative-nvidia ii nvidia-alternative 295.20-1 allows the selection of NVIDIA as GLX provider ii nvidia-glx 295.20-1 NVIDIA metapackage ii nvidia-installer-cleanup 20111111+3 Cleanup after driver installation with the nvidia-installer ii nvidia-kernel-common 20111111+3 NVIDIA binary kernel module support files ii nvidia-kernel-dkms 295.20-1 NVIDIA binary kernel module DKMS source ii nvidia-settings 295.20-1 Tool for configuring the NVIDIA graphics driver ii nvidia-support 20111111+3 NVIDIA binary graphics driver support files ii nvidia-vdpau-driver 295.20-1 NVIDIA vdpau driver ii xserver-xorg-video-nvidia 295.20-1 NVIDIA binary Xorg driver
jajko jest z repo więc nie wiem czy ma aktywnego selinuxa
A w wolnym czasie, robię noże :)
Offline
#15 2012-03-24 15:48:02
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: problem z Xami po upgrade systemu
Nie działa grafika na tym sterowniku ?
Bo masz przeciez zainstalowany.
Offline
#16 2012-03-24 15:53:17
urbinek - Dzban Naczelny
Re: problem z Xami po upgrade systemu
działa
ale jak włączę glxgears, dostaję
Kod:
[ 85.679764] NVRM: GPU at 0000:01:00.0 has fallen off the bus. [ 85.679792] NVRM: os_pci_init_handle: invalid context! [ 85.679802] NVRM: os_pci_init_handle: invalid context! [ 85.679851] NVRM: os_pci_init_handle: invalid context! [ 85.679856] NVRM: os_pci_init_handle: invalid context! [ 86.631716] irq 25: nobody cared (try booting with the "irqpoll" option) [ 86.631723] Pid: 1327, comm: Xorg Tainted: P O 3.2.0-2-686-pae #1 [ 86.631725] Call Trace: [ 86.631733] [<c1078a21>] ? __report_bad_irq+0x1c/0x8d [ 86.631736] [<c1078c2b>] ? note_interrupt+0x122/0x18f [ 86.631739] [<c10775cb>] ? handle_irq_event_percpu+0x142/0x158 [ 86.631743] [<c10791de>] ? handle_level_irq+0x56/0x56 [ 86.631745] [<c1077602>] ? handle_irq_event+0x21/0x37 [ 86.631748] [<c10791de>] ? handle_level_irq+0x56/0x56 [ 86.631751] [<c107923e>] ? handle_fasteoi_irq+0x60/0x85 [ 86.631753] <IRQ> [<c100cdcf>] ? do_IRQ+0x2e/0x76 [ 86.631760] [<c12c57f0>] ? common_interrupt+0x30/0x38 [ 86.631762] handlers: [ 86.631932] [<f9dcadaf>] nv_kern_isr [ 86.631935] Disabling IRQ #25
i zwis systemu
p.s.
Kod:
urbinek@urbinek:~$ cat /var/log/nvidia-installer.log nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Sat Mar 24 15:48:55 2012 installer version: 275.43 PATH: /sbin:/usr/sbin:/bin:/usr/bin option status: license pre-accepted : false update : false force update : false expert : false uninstall : false driver info : false precompiled interfaces : true no ncurses color : false query latest version : false no questions : false silent : false no recursion : false no backup : false kernel module only : false sanity : false add this kernel : false no runlevel check : false no network : false no ABI note : false no RPMs : false no kernel module : false force SELinux : default no X server check : false no cc version check : false run distro scripts : true no nouveau check : false run nvidia-xconfig : false sigwinch work around : true force tls : (not specified) X install prefix : (not specified) X library install path : (not specified) X module install path : (not specified) OpenGL install prefix : (not specified) OpenGL install libdir : (not specified) utility install prefix : (not specified) utility install libdir : (not specified) installer prefix : (not specified) doc install prefix : (not specified) kernel name : (not specified) kernel include path : (not specified) kernel source path : (not specified) kernel output path : (not specified) kernel install path : (not specified) precompiled kernel interfaces path : (not specified) precompiled kernel interfaces url : (not specified) proc mount point : /proc ui : (not specified) tmpdir : /tmp ftp mirror : ftp://download.nvidia.com RPM file list : (not specified) selinux chcon type : (not specified) Using: nvidia-installer ncurses user interface WARNING: Skipping the runlevel check (the utility `runlevel` failed to run). -> License accepted. -> Installing NVIDIA driver version 275.43. -> Running distribution scripts executing: '/usr/lib/nvidia/pre-install'... If you want to use the nvidia-installer please uninstall the Debian packages first. The two methods of installation cannot be used at the same time. Please ABORT now!
A w wolnym czasie, robię noże :)
Offline
#17 2012-03-24 15:59:17
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: problem z Xami po upgrade systemu
xorg.conf masz nowy czy stary ?
Offline
#18 2012-03-24 16:00:17
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: problem z Xami po upgrade systemu
Masz tam pod koniec napisane, że jeśli chcesz instalować sterowniki skryptem, musisz najpierw usunąć te z repozytorium.
np.:
Kod:
aptitude purge nvidia~i
Offline
#19 2012-03-24 16:02:38
urbinek - Dzban Naczelny
Re: problem z Xami po upgrade systemu
instalator wczesniej sam usówał... zaraz zobacze
Kod:
urbinek@urbinek:~$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 295.33 (buildmeister@swio-display-x86-rhel47-06.nvidia.com) Sat Mar 17 16:01:53 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Buttons" "7"
Option "ZAxisMapping" "4 5"
Option "ButtonMapping" "1 2 3 7 6"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo" "true"
# Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x3333"
# Option "Coolbits" "1"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSectionA w wolnym czasie, robię noże :)
Offline
#20 2012-03-24 16:06:01
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: problem z Xami po upgrade systemu
W drugą stronę sam usuwa. Znaczy przy instalacji z repozytorium automatycznie usuwane są te ze skryptu.
Offline
#21 2012-03-24 18:02:44
urbinek - Dzban Naczelny
Re: problem z Xami po upgrade systemu
k, po ręcznym usunięciu udało się zainstalować NVIDIA-Linux-x86-275.43
trzeba zapamiętać, ze 290+ to zuo, nie sądziłem, że tak mi namiesza ten sterownik, zawse działały...
A w wolnym czasie, robię noże :)
Offline
#22 2012-03-24 18:14:21
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/random
- Zarejestrowany: 2008-01-07
Re: problem z Xami po upgrade systemu
290.* to nie zuo, trzeba po prostu pamiętać, że stery NVidii to nie kanapki, żeby jeden na drugim instalować. ;)
Ostatnio edytowany przez Jacekalex (2012-03-24 18:37:05)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline