Forum Debian Users Gang

deb http://http.debian.net/debian/ wheezy main contrib non-free

aptitude install firmware-linux-nonfree

aticonfig --initial

lspci -k | grep -A2 VGA

mkdir /etc/X11/xorg.conf.d
echo -e 'Section "Device"\n\tIdentifier "My GPU"\n\tDriver "fglrx"\nEndSection' > /etc/X11/xorg.conf.d/20-fglrx.conf

Module                  Size  Used by
cryptd                 14517  0 
aes_x86_64             16843  2 
aes_generic            33026  1 aes_x86_64
bnep                   17567  2 
parport_pc             22364  0 
rfcomm                 33700  0 
bluetooth             119455  10 rfcomm,bnep
ppdev                  12763  0 
lp                     17149  0 
parport                31858  3 lp,ppdev,parport_pc
binfmt_misc            12957  1 
uinput                 17440  1 
nfsd                  216170  2 
nfs                   308313  0 
nfs_acl                12511  2 nfs,nfsd
auth_rpcgss            37143  2 nfs,nfsd
fscache                36739  1 nfs
lockd                  67306  2 nfs,nfsd
sunrpc                173730  6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd
nls_utf8               12456  1 
nls_cp437              16553  1 
vfat                   17316  1 
fat                    45642  1 vfat
loop                   22641  0 
uvcvideo               57744  0 
videodev               70889  1 uvcvideo
v4l2_compat_ioctl32    16655  1 videodev
media                  18148  2 videodev,uvcvideo
snd_hda_codec_hdmi     30824  1 
snd_hda_codec_realtek   188858  1 
snd_hda_intel          26259  3 
joydev                 17266  0 
snd_hda_codec          78031  3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
arc4                   12458  2 
snd_hwdep              13186  1 snd_hda_codec
ath5k                 129406  0 
iTCO_wdt               17081  0 
snd_pcm                68083  3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
fglrx                3203269  57 
iTCO_vendor_support    12704  1 iTCO_wdt
snd_page_alloc         13003  2 snd_pcm,snd_hda_intel
i2c_i801               16870  0 
ath                    21370  1 ath5k
mac80211              192806  1 ath5k
cfg80211              137243  3 mac80211,ath,ath5k
snd_seq                45126  0 
snd_seq_device         13176  1 snd_seq
snd_timer              22917  2 snd_seq,snd_pcm
battery                13146  0 
ac                     12624  0 
coretemp               12898  0 
acpi_cpufreq           12935  1 
power_supply           13475  2 ac,battery
evdev                  17562  19 
samsung_laptop         12863  0 
i2c_core               23876  2 i2c_i801,videodev
psmouse                69265  0 
pcspkr                 12579  0 
serio_raw              12931  0 
snd                    52889  15 snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
video                  17683  0 
mperf                  12453  1 acpi_cpufreq
processor              28157  3 acpi_cpufreq
button                 12937  1 fglrx
rfkill                 19012  6 samsung_laptop,cfg80211,bluetooth
soundcore              13065  1 snd
ext4                  350763  2 
crc16                  12343  2 ext4,bluetooth
jbd2                   62115  1 ext4
mbcache                13114  1 ext4
sg                     25874  0 
sd_mod                 36136  5 
sr_mod                 21899  0 
crc_t10dif             12348  1 sd_mod
cdrom                  35401  1 sr_mod
thermal                17383  0 
fan                    12674  0 
thermal_sys            18040  4 fan,thermal,processor,video
ahci                   24997  4 
libahci                22860  1 ahci
uhci_hcd               26865  0 
ehci_hcd               40215  0 
libata                140630  2 libahci,ahci
sky2                   45442  0 
scsi_mod              162269  4 libata,sr_mod,sd_mod,sg
usbcore               128741  4 ehci_hcd,uhci_hcd,uvcvideo
usb_common             12354  1 usbcore

[    24.258] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    24.258] X Protocol Version 11, Revision 0
[    24.258] Build Operating System: Linux 3.10-3-amd64 x86_64 Debian
[    24.258] Current Operating System: Linux laptop 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64
[    24.258] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=0160a480-b326-42a4-801c-bcaf4c51a3ea ro quiet
[    24.258] Build Date: 21 October 2013  04:49:48PM
[    24.258] xorg-server 2:1.12.4-6+deb7u1 (Moritz Muehlenhoff <jmm@debian.org>) 
[    24.258] Current version of pixman: 0.26.0
[    24.258]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    24.258] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.258] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  2 23:37:48 2013
[    24.271] (==) Using config file: "/etc/X11/xorg.conf"
[    24.271] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.463] (==) ServerLayout "aticonfig Layout"
[    24.463] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    24.463] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    24.463] (**) |   |-->Device "aticonfig-Device[0]-0"
[    24.463] (==) Automatically adding devices
[    24.463] (==) Automatically enabling devices
[    24.534] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    24.534]     Entry deleted from font path.
[    24.647] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    24.647]     Entry deleted from font path.
[    24.647] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    24.647] (==) ModulePath set to "/usr/lib/xorg/modules"
[    24.647] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.647] (II) Loader magic: 0x7fa373cf7ae0
[    24.647] (II) Module ABI versions:
[    24.647]     X.Org ANSI C Emulation: 0.4
[    24.647]     X.Org Video Driver: 12.1
[    24.647]     X.Org XInput driver : 16.0
[    24.647]     X.Org Server Extension : 6.0
[    24.648] (--) PCI:*(0:1:0:0) 1002:9552:144d:c050 rev 0, Mem @ 0xd0000000/268435456, 0xcfef0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[    24.648] (II) Open ACPI successful (/var/run/acpid.socket)
[    24.648] (II) "extmod" will be loaded by default.
[    24.648] (II) "dbe" will be loaded by default.
[    24.648] (II) "glx" will be loaded by default.
[    24.648] (II) "record" will be loaded by default.
[    24.648] (II) "dri" will be loaded by default.
[    24.648] (II) "dri2" will be loaded by default.
[    24.648] (II) LoadModule: "extmod"
[    24.649] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    24.661] (II) Module extmod: vendor="X.Org Foundation"
[    24.661]     compiled for 1.12.4, module version = 1.0.0
[    24.661]     Module class: X.Org Server Extension
[    24.661]     ABI class: X.Org Server Extension, version 6.0
[    24.661] (II) Loading extension SELinux
[    24.661] (II) Loading extension MIT-SCREEN-SAVER
[    24.661] (II) Loading extension XFree86-VidModeExtension
[    24.661] (II) Loading extension XFree86-DGA
[    24.661] (II) Loading extension DPMS
[    24.661] (II) Loading extension XVideo
[    24.661] (II) Loading extension XVideo-MotionCompensation
[    24.661] (II) Loading extension X-Resource
[    24.661] (II) LoadModule: "dbe"
[    24.661] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    24.681] (II) Module dbe: vendor="X.Org Foundation"
[    24.681]     compiled for 1.12.4, module version = 1.0.0
[    24.681]     Module class: X.Org Server Extension
[    24.681]     ABI class: X.Org Server Extension, version 6.0
[    24.681] (II) Loading extension DOUBLE-BUFFER
[    24.681] (II) LoadModule: "glx"
[    24.681] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    24.722] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    24.722]     compiled for 6.9.0, module version = 1.0.0
[    24.722] (II) Loading extension GLX
[    24.722] (II) LoadModule: "record"
[    24.722] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    24.784] (II) Module record: vendor="X.Org Foundation"
[    24.784]     compiled for 1.12.4, module version = 1.13.0
[    24.784]     Module class: X.Org Server Extension
[    24.784]     ABI class: X.Org Server Extension, version 6.0
[    24.784] (II) Loading extension RECORD
[    24.784] (II) LoadModule: "dri"
[    24.784] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    24.804] (II) Module dri: vendor="X.Org Foundation"
[    24.804]     compiled for 1.12.4, module version = 1.0.0
[    24.804]     ABI class: X.Org Server Extension, version 6.0
[    24.804] (II) Loading extension XFree86-DRI
[    24.804] (II) LoadModule: "dri2"
[    24.804] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    24.805] (II) Module dri2: vendor="X.Org Foundation"
[    24.805]     compiled for 1.12.4, module version = 1.2.0
[    24.805]     ABI class: X.Org Server Extension, version 6.0
[    24.805] (II) Loading extension DRI2
[    24.805] (II) LoadModule: "fglrx"
[    24.805] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    25.291] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    25.291]     compiled for 1.4.99.906, module version = 8.97.2
[    25.291]     Module class: X.Org Video Driver
[    25.292] (II) Loading sub module "fglrxdrm"
[    25.292] (II) LoadModule: "fglrxdrm"
[    25.292] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    25.349] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    25.349]     compiled for 1.4.99.906, module version = 8.97.2
[    25.349] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    25.349] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7                           
[    25.349] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
[    25.349] (++) using VT number 7

[    25.354] (WW) Falling back to old probe method for fglrx
[    25.433] (II) Loading PCS database from /etc/ati/amdpcsdb
[    25.435] (--) Chipset Supported AMD Graphics Processor (0x9552) found
[    25.455] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    25.456] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    25.456] (II) AMD Video driver is signed
[    25.456] (II) fglrx(0): pEnt->device->identifier=0x7fa374932c20
[    25.456] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    25.456] (II) Loading sub module "vgahw"
[    25.456] (II) LoadModule: "vgahw"
[    25.457] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    25.470] (II) Module vgahw: vendor="X.Org Foundation"
[    25.470]     compiled for 1.12.4, module version = 0.1.0
[    25.470]     ABI class: X.Org Video Driver, version 12.1
[    25.470] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    25.470] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    25.470] (==) fglrx(0): Default visual is TrueColor
[    25.470] (**) fglrx(0): Option "DPMS" "true"
[    25.470] (==) fglrx(0): RGB weight 888
[    25.470] (II) fglrx(0): Using 8 bits per RGB 
[    25.470] (==) fglrx(0): Buffer Tiling is ON
[    25.471] (II) Loading sub module "fglrxdrm"
[    25.471] (II) LoadModule: "fglrxdrm"
[    25.471] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    25.471] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    25.471]     compiled for 1.4.99.906, module version = 8.97.2
[    25.474] ukiDynamicMajor: found major device number 252
[    25.474] ukiDynamicMajor: found major device number 252
[    25.474] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    25.474] ukiOpenDevice: node name is /dev/ati/card0
[    25.474] ukiOpenDevice: open result is 12, (OK)
[    25.474] ukiOpenByBusid: ukiOpenMinor returns 12
[    25.474] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    25.474] (**) fglrx(0): NoAccel = NO
[    25.474] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    25.474] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4300 Series" (Chipset = 0x9552)
[    25.474] (--) fglrx(0): (PciSubVendor = 0x144d, PciSubDevice = 0xc050)
[    25.474] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    25.474] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    25.474] (--) fglrx(0): MMIO registers at 0xcfef0000
[    25.474] (--) fglrx(0): I/O port at 0x00002000
[    25.474] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    25.495] (II) fglrx(0): AC Adapter is used
[    25.541] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    25.636] (II) Loading sub module "vbe"
[    25.636] (II) LoadModule: "vbe"
[    25.636] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    25.650] (II) Module vbe: vendor="X.Org Foundation"
[    25.650]     compiled for 1.12.4, module version = 1.1.0
[    25.650]     ABI class: X.Org Video Driver, version 12.1
[    25.651] (II) fglrx(0): VESA BIOS detected
[    25.651] (II) fglrx(0): VESA VBE Version 3.0
[    25.651] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    25.651] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    25.651] (II) fglrx(0): VESA VBE OEM Software Rev: 11.20
[    25.651] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    25.651] (II) fglrx(0): VESA VBE OEM Product: M92
[    25.651] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    25.682] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    25.682] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[    25.682] (II) fglrx(0): PCIE card detected
[    25.682] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    25.682] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    25.684] (II) fglrx(0): Using adapter: 1:0.0.
[    25.715] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    25.938] (II) fglrx(0): Interrupt handler installed at IRQ 48.
[    25.939] (II) fglrx(0): RandR 1.2 support is enabled!
[    25.939] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    25.939] (==) fglrx(0): Center Mode is disabled 
[    25.939] (II) Loading sub module "fb"
[    25.939] (II) LoadModule: "fb"
[    25.939] (II) Loading /usr/lib/xorg/modules/libfb.so
[    25.951] (II) Module fb: vendor="X.Org Foundation"
[    25.951]     compiled for 1.12.4, module version = 1.0.0
[    25.951]     ABI class: X.Org ANSI C Emulation, version 0.4
[    25.951] (II) Loading sub module "ddc"
[    25.951] (II) LoadModule: "ddc"
[    25.951] (II) Module "ddc" already built-in
[    26.207] (II) fglrx(0): Finished Initialize PPLIB!
[    26.234] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    26.234] (II) fglrx(0): Output DFP1 has no monitor section
[    26.234] (II) fglrx(0): Output CRT1 has no monitor section
[    26.234] (II) Loading sub module "ddc"
[    26.234] (II) LoadModule: "ddc"
[    26.234] (II) Module "ddc" already built-in
[    26.234] (II) fglrx(0): Connected Display0: LVDS
[    26.234] (II) fglrx(0): Display0 EDID data ---------------------------
[    26.234] (II) fglrx(0): Manufacturer: CPT  Model: 14bf  Serial#: 0
[    26.234] (II) fglrx(0): Year: 2009  Week: 37
[    26.234] (II) fglrx(0): EDID Version: 1.3
[    26.234] (II) fglrx(0): Digital Display Input
[    26.234] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    26.234] (II) fglrx(0): Gamma: 2.20
[    26.234] (II) fglrx(0): No DPMS capabilities specified
[    26.234] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    26.234] (II) fglrx(0): First detailed timing is preferred mode
[    26.234] (II) fglrx(0): redX: 0.618 redY: 0.340   greenX: 0.331 greenY: 0.568
[    26.234] (II) fglrx(0): blueX: 0.149 blueY: 0.059   whiteX: 0.315 whiteY: 0.329
[    26.234] (II) fglrx(0): Manufacturer's mask: 0
[    26.234] (II) fglrx(0): Supported detailed timing:
[    26.234] (II) fglrx(0): clock: 75.4 MHz   Image Size:  344 x 193 mm
[    26.234] (II) fglrx(0): h_active: 1366  h_sync: 1425  h_sync_end 1464 h_blank_end 1560 h_border: 0
[    26.234] (II) fglrx(0): v_active: 768  v_sync: 773  v_sync_end 783 v_blanking: 806 v_border: 0
[    26.235] (II) fglrx(0): Unknown vendor-specific block f
[    26.235] (II) fglrx(0):  CPT
[    26.235] (II) fglrx(0):  CLAA156WA11A
[    26.235] (II) fglrx(0): EDID (in hex):
[    26.235] (II) fglrx(0):     00ffffffffffff000e14bf1400000000
[    26.235] (II) fglrx(0):     25130103802213780a4e4d9e57549126
[    26.235] (II) fglrx(0):     0f505400000001010101010101010101
[    26.235] (II) fglrx(0):     010101010101781d56c2500026303b27
[    26.235] (II) fglrx(0):     5a0058c1100000180000000f00202020
[    26.235] (II) fglrx(0):     2020202020206e050f00000000fe0043
[    26.235] (II) fglrx(0):     50540a202020202020202020000000fe
[    26.235] (II) fglrx(0):     00434c4141313536574131314120002a
[    26.235] (II) fglrx(0): End of Display0 EDID data --------------------
[    26.268] (II) fglrx(0): EDID for output LVDS
[    26.268] (II) fglrx(0): Manufacturer: CPT  Model: 14bf  Serial#: 0
[    26.268] (II) fglrx(0): Year: 2009  Week: 37
[    26.268] (II) fglrx(0): EDID Version: 1.3
[    26.268] (II) fglrx(0): Digital Display Input
[    26.268] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    26.268] (II) fglrx(0): Gamma: 2.20
[    26.268] (II) fglrx(0): No DPMS capabilities specified
[    26.268] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    26.268] (II) fglrx(0): First detailed timing is preferred mode
[    26.268] (II) fglrx(0): redX: 0.618 redY: 0.340   greenX: 0.331 greenY: 0.568
[    26.268] (II) fglrx(0): blueX: 0.149 blueY: 0.059   whiteX: 0.315 whiteY: 0.329
[    26.268] (II) fglrx(0): Manufacturer's mask: 0
[    26.268] (II) fglrx(0): Supported detailed timing:
[    26.268] (II) fglrx(0): clock: 75.4 MHz   Image Size:  344 x 193 mm
[    26.268] (II) fglrx(0): h_active: 1366  h_sync: 1425  h_sync_end 1464 h_blank_end 1560 h_border: 0
[    26.268] (II) fglrx(0): v_active: 768  v_sync: 773  v_sync_end 783 v_blanking: 806 v_border: 0
[    26.268] (II) fglrx(0): Unknown vendor-specific block f
[    26.268] (II) fglrx(0):  CPT
[    26.268] (II) fglrx(0):  CLAA156WA11A
[    26.268] (II) fglrx(0): EDID (in hex):
[    26.269] (II) fglrx(0):     00ffffffffffff000e14bf1400000000
[    26.269] (II) fglrx(0):     25130103802213780a4e4d9e57549126
[    26.269] (II) fglrx(0):     0f505400000001010101010101010101
[    26.269] (II) fglrx(0):     010101010101781d56c2500026303b27
[    26.269] (II) fglrx(0):     5a0058c1100000180000000f00202020
[    26.269] (II) fglrx(0):     2020202020206e050f00000000fe0043
[    26.269] (II) fglrx(0):     50540a202020202020202020000000fe
[    26.269] (II) fglrx(0):     00434c4141313536574131314120002a
[    26.269] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[    26.269] (II) fglrx(0): Printing DDC gathered Modelines:
[    26.269] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[    26.269] (II) fglrx(0): Printing probed modes for output LVDS
[    26.269] (II) fglrx(0): Modeline "1366x768"x60.0   75.44  1366 1425 1464 1560  768 773 783 806 +hsync +vsync (48.4 kHz)
[    26.269] (II) fglrx(0): Modeline "1280x768"x60.0   75.44  1280 1425 1464 1560  768 773 783 806 +hsync +vsync (48.4 kHz)
[    26.269] (II) fglrx(0): Modeline "1280x720"x60.0   75.44  1280 1425 1464 1560  720 773 783 806 +hsync +vsync (48.4 kHz)
[    26.269] (II) fglrx(0): Modeline "1024x768"x60.0   75.44  1024 1425 1464 1560  768 773 783 806 +hsync +vsync (48.4 kHz)
[    26.269] (II) fglrx(0): Modeline "1024x600"x60.0   75.44  1024 1425 1464 1560  600 773 783 806 +hsync +vsync (48.4 kHz)
[    26.269] (II) fglrx(0): Modeline "800x600"x60.0   75.44  800 1425 1464 1560  600 773 783 806 +hsync +vsync (48.4 kHz)
[    26.269] (II) fglrx(0): Modeline "800x480"x60.0   75.44  800 1425 1464 1560  480 773 783 806 +hsync +vsync (48.4 kHz)
[    26.269] (II) fglrx(0): Modeline "720x480"x60.0   75.44  720 1425 1464 1560  480 773 783 806 +hsync +vsync (48.4 kHz)
[    26.269] (II) fglrx(0): Modeline "640x480"x60.0   75.44  640 1425 1464 1560  480 773 783 806 +hsync +vsync (48.4 kHz)
[    26.269] (II) fglrx(0): EDID for output DFP1
[    26.269] (II) fglrx(0): EDID for output CRT1
[    26.269] (II) fglrx(0): Output LVDS connected
[    26.269] (II) fglrx(0): Output DFP1 disconnected
[    26.269] (II) fglrx(0): Output CRT1 disconnected
[    26.269] (II) fglrx(0): Using exact sizes for initial modes
[    26.269] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    26.269] (II) fglrx(0): Display dimensions: (340, 190) mm
[    26.269] (II) fglrx(0): DPI set to (102, 102)
[    26.269] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4300 Series has 2 configurable heads and 1 displays connected.
[    26.269] (==) fglrx(0):  PseudoColor visuals disabled
[    26.269] (II) Loading sub module "ramdac"
[    26.269] (II) LoadModule: "ramdac"
[    26.269] (II) Module "ramdac" already built-in
[    26.269] (==) fglrx(0): NoDRI = NO
[    26.269] (==) fglrx(0): Capabilities: 0x00000000
[    26.269] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    26.269] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    26.269] (==) fglrx(0): UseFastTLS=0
[    26.269] (==) fglrx(0): BlockSignalsOnLock=1
[    26.269] (--) Depth 24 pixmap format is 32 bpp
[    26.270] (II) Loading extension ATIFGLRXDRI
[    26.270] (II) fglrx(0): doing swlDriScreenInit
[    26.270] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    26.270] ukiDynamicMajor: found major device number 252
[    26.270] ukiDynamicMajor: found major device number 252
[    26.270] ukiDynamicMajor: found major device number 252
[    26.270] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    26.270] ukiOpenDevice: node name is /dev/ati/card0
[    26.270] ukiOpenDevice: open result is 13, (OK)
[    26.270] ukiOpenByBusid: ukiOpenMinor returns 13
[    26.270] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    26.270] (II) fglrx(0): [uki] DRM interface version 1.0
[    26.270] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    26.270] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    26.270] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fa36e23a000
[    26.270] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    26.270] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    26.270] (II) fglrx(0): swlDriScreenInit done
[    26.270] (II) fglrx(0): Kernel Module Version Information:
[    26.270] (II) fglrx(0):     Name: fglrx
[    26.270] (II) fglrx(0):     Version: 8.97.2
[    26.270] (II) fglrx(0):     Date: Nov 16 2012
[    26.270] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    26.270] (II) fglrx(0): Kernel Module version matches driver.
[    26.270] (II) fglrx(0): Kernel Module Build Time Information:
[    26.270] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-4-amd64
[    26.270] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    26.270] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    26.270] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    26.270] (II) fglrx(0): [uki] register handle = 0x00004000
[    26.292] (II) fglrx(0): DRI initialization successfull
[    26.323] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[    26.329] (==) fglrx(0): Backing store disabled
[    26.329] (II) Loading extension FGLRXEXTENSION
[    26.329] (**) fglrx(0): DPMS enabled
[    26.330] (II) fglrx(0): Initialized in-driver Xinerama extension
[    26.330] (**) fglrx(0): Textured Video is enabled.
[    26.330] (II) LoadModule: "glesx"
[    26.330] (II) Loading /usr/lib/xorg/modules/glesx.so
[    26.478] (II) Module glesx: vendor="X.Org Foundation"
[    26.478]     compiled for 1.4.99.906, module version = 1.0.0
[    26.478] (II) Loading extension GLESX
[    26.478] (II) fglrx(0): GLESX enableFlags = 528
[    26.479] (II) fglrx(0): GLESX is enabled
[    26.479] (II) LoadModule: "amdxmm"
[    26.479] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    26.488] (II) Module amdxmm: vendor="X.Org Foundation"
[    26.488]     compiled for 1.4.99.906, module version = 2.0.0
[    26.489] (II) Loading extension AMDXVOPL
[    26.489] (II) Loading extension AMDXVBA
[    26.497] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    26.498] (II) fglrx(0): Enable composite support successfully
[    26.498] (WW) fglrx(0): Option "VendorName" is not used
[    26.498] (WW) fglrx(0): Option "ModelName" is not used
[    26.498] (II) fglrx(0): X context handle = 0x1
[    26.499] (II) fglrx(0): [DRI] installation complete
[    26.499] (==) fglrx(0): Silken mouse enabled
[    26.499] (==) fglrx(0): Using HW cursor of display infrastructure!
[    26.499] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    26.499] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    26.499] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    27.550] (--) RandR disabled
[    27.550] (II) Initializing built-in extension Generic Event Extension
[    27.550] (II) Initializing built-in extension SHAPE
[    27.550] (II) Initializing built-in extension MIT-SHM
[    27.550] (II) Initializing built-in extension XInputExtension
[    27.550] (II) Initializing built-in extension XTEST
[    27.550] (II) Initializing built-in extension BIG-REQUESTS
[    27.550] (II) Initializing built-in extension SYNC
[    27.550] (II) Initializing built-in extension XKEYBOARD
[    27.550] (II) Initializing built-in extension XC-MISC
[    27.550] (II) Initializing built-in extension SECURITY
[    27.550] (II) Initializing built-in extension XINERAMA
[    27.550] (II) Initializing built-in extension XFIXES
[    27.550] (II) Initializing built-in extension RENDER
[    27.550] (II) Initializing built-in extension RANDR
[    27.550] (II) Initializing built-in extension COMPOSITE
[    27.550] (II) Initializing built-in extension DAMAGE
[    27.551] (II) SELinux: Disabled on system
[    27.553] ukiDynamicMajor: found major device number 252
[    27.553] ukiDynamicMajor: found major device number 252
[    27.553] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    27.553] ukiOpenDevice: node name is /dev/ati/card0
[    27.553] ukiOpenDevice: open result is 14, (OK)
[    27.553] ukiOpenByBusid: ukiOpenMinor returns 14
[    27.553] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    28.647] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    28.758] (II) fglrx(0): Enable the clock gating!
[    28.758] (II) fglrx(0): Setting screen physical size to 361 x 203
[    29.137] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    29.137] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.137] (II) LoadModule: "evdev"
[    29.137] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.154] (II) Module evdev: vendor="X.Org Foundation"
[    29.154]     compiled for 1.12.1, module version = 2.7.0
[    29.154]     Module class: X.Org XInput Driver
[    29.154]     ABI class: X.Org XInput driver, version 16.0
[    29.154] (II) Using input driver 'evdev' for 'Power Button'
[    29.154] (**) Power Button: always reports core events
[    29.154] (**) evdev: Power Button: Device: "/dev/input/event4"
[    29.154] (--) evdev: Power Button: Vendor 0 Product 0x1
[    29.154] (--) evdev: Power Button: Found keys
[    29.154] (II) evdev: Power Button: Configuring as keyboard
[    29.154] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    29.154] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    29.154] (**) Option "xkb_rules" "evdev"
[    29.154] (**) Option "xkb_model" "pc105"
[    29.154] (**) Option "xkb_layout" "pl"
[    29.187] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    29.187] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    29.187] (II) Using input driver 'evdev' for 'Video Bus'
[    29.187] (**) Video Bus: always reports core events
[    29.187] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    29.187] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    29.187] (--) evdev: Video Bus: Found keys
[    29.187] (II) evdev: Video Bus: Configuring as keyboard
[    29.187] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event5"
[    29.187] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    29.187] (**) Option "xkb_rules" "evdev"
[    29.187] (**) Option "xkb_model" "pc105"
[    29.187] (**) Option "xkb_layout" "pl"
[    29.187] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    29.187] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.187] (II) Using input driver 'evdev' for 'Power Button'
[    29.187] (**) Power Button: always reports core events
[    29.187] (**) evdev: Power Button: Device: "/dev/input/event2"
[    29.187] (--) evdev: Power Button: Vendor 0 Product 0x1
[    29.187] (--) evdev: Power Button: Found keys
[    29.187] (II) evdev: Power Button: Configuring as keyboard
[    29.188] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    29.188] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    29.188] (**) Option "xkb_rules" "evdev"
[    29.188] (**) Option "xkb_model" "pc105"
[    29.188] (**) Option "xkb_layout" "pl"
[    29.188] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    29.188] (II) No input driver specified, ignoring this device.
[    29.188] (II) This device may have been added with another device file.
[    29.189] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    29.189] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    29.189] (II) Using input driver 'evdev' for 'Sleep Button'
[    29.189] (**) Sleep Button: always reports core events
[    29.189] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    29.189] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    29.189] (--) evdev: Sleep Button: Found keys
[    29.189] (II) evdev: Sleep Button: Configuring as keyboard
[    29.189] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[    29.189] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    29.189] (**) Option "xkb_rules" "evdev"
[    29.189] (**) Option "xkb_model" "pc105"
[    29.189] (**) Option "xkb_layout" "pl"
[    29.189] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[    29.189] (II) No input driver specified, ignoring this device.
[    29.189] (II) This device may have been added with another device file.
[    29.190] (II) config/udev: Adding input device Namuga 1.3M Webcam (/dev/input/event12)
[    29.190] (**) Namuga 1.3M Webcam: Applying InputClass "evdev keyboard catchall"
[    29.190] (II) Using input driver 'evdev' for 'Namuga 1.3M Webcam'
[    29.190] (**) Namuga 1.3M Webcam: always reports core events
[    29.190] (**) evdev: Namuga 1.3M Webcam: Device: "/dev/input/event12"
[    29.190] (--) evdev: Namuga 1.3M Webcam: Vendor 0xac8 Product 0xc335
[    29.190] (--) evdev: Namuga 1.3M Webcam: Found keys
[    29.190] (II) evdev: Namuga 1.3M Webcam: Configuring as keyboard
[    29.190] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input12/event12"
[    29.190] (II) XINPUT: Adding extended input device "Namuga 1.3M Webcam" (type: KEYBOARD, id 10)
[    29.190] (**) Option "xkb_rules" "evdev"
[    29.190] (**) Option "xkb_model" "pc105"
[    29.190] (**) Option "xkb_layout" "pl"
[    29.190] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    29.190] (II) No input driver specified, ignoring this device.
[    29.190] (II) This device may have been added with another device file.
[    29.191] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[    29.191] (II) No input driver specified, ignoring this device.
[    29.191] (II) This device may have been added with another device file.
[    29.191] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[    29.191] (II) No input driver specified, ignoring this device.
[    29.191] (II) This device may have been added with another device file.
[    29.191] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    29.191] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    29.191] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    29.192] (**) AT Translated Set 2 keyboard: always reports core events
[    29.192] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    29.192] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    29.192] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    29.192] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    29.192] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    29.192] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    29.192] (**) Option "xkb_rules" "evdev"
[    29.192] (**) Option "xkb_model" "pc105"
[    29.192] (**) Option "xkb_layout" "pl"
[    29.192] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    29.192] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    29.192] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    29.192] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    29.192] (II) LoadModule: "synaptics"
[    29.193] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    29.224] (II) Module synaptics: vendor="X.Org Foundation"
[    29.225]     compiled for 1.12.4, module version = 1.6.2
[    29.225]     Module class: X.Org XInput Driver
[    29.225]     ABI class: X.Org XInput driver, version 16.0
[    29.225] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    29.225] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    29.225] (**) Option "Device" "/dev/input/event7"
[    29.240] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    29.240] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[    29.240] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
[    29.240] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    29.240] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    29.240] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    29.240] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    29.240] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    29.240] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    29.240] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[    29.240] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    29.240] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    29.240] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    29.240] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[    29.241] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    29.241] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    29.241] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    29.241] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    29.241] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    29.241] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    29.241] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    29.242] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    29.242] (II) No input driver specified, ignoring this device.
[    29.242] (II) This device may have been added with another device file.
[    29.243] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13)
[    29.243] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    29.243] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    29.243] (**) ACPI Virtual Keyboard Device: always reports core events
[    29.243] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event13"
[    29.243] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    29.243] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    29.243] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    29.243] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[    29.243] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13)
[    29.243] (**) Option "xkb_rules" "evdev"
[    29.243] (**) Option "xkb_model" "pc105"
[    29.243] (**) Option "xkb_layout" "pl"
[    29.753] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    29.771] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[    29.771] (II) fglrx(0): Printing DDC gathered Modelines:
[    29.771] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[    33.021] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[    33.021] (II) fglrx(0): Printing DDC gathered Modelines:
[    33.021] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[    49.305] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[    49.305] (II) fglrx(0): Printing DDC gathered Modelines:
[    49.305] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[    51.455] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[    51.455] (II) fglrx(0): Printing DDC gathered Modelines:
[    51.455] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[    55.059] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[    55.059] (II) fglrx(0): Printing DDC gathered Modelines:
[    55.059] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[  2082.029] (II) fglrx(0): Lid Close Received
[  2082.046] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[  2082.046] (II) fglrx(0): Printing DDC gathered Modelines:
[  2082.046] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[  2083.124] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[  2083.124] (II) fglrx(0): Printing DDC gathered Modelines:
[  2083.124] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[  2085.176] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2085.176] (II) fglrx(0): Backup framebuffer data.
[  2085.192] (II) fglrx(0): Backup complete.
[  2089.088] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2089.135] (II) fglrx(0): Restore framebuffer data.
[  2089.146] (II) fglrx(0): Restore complete.
[  2089.147] (II) fglrx(0): AC Adapter is used
[  2089.592] (II) fglrx(0): Lid Open Received
[  2089.592] (II) fglrx(0): Lid Open Received
[  2089.692] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2089.819] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[  2089.819] (II) fglrx(0): Printing DDC gathered Modelines:
[  2089.819] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[  3140.035] (II) fglrx(0): Lid Close Received
[  3140.064] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[  3140.064] (II) fglrx(0): Printing DDC gathered Modelines:
[  3140.064] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[  3141.086] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[  3141.086] (II) fglrx(0): Printing DDC gathered Modelines:
[  3141.086] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)
[  3142.968] (II) AIGLX: Suspending AIGLX clients for VT switch
[  3142.968] (II) fglrx(0): Backup framebuffer data.
[  3142.984] (II) fglrx(0): Backup complete.
[  3147.092] (II) AIGLX: Resuming AIGLX clients after VT switch
[  3147.150] (II) fglrx(0): Restore framebuffer data.
[  3147.160] (II) fglrx(0): Restore complete.
[  3147.160] (II) fglrx(0): AC Adapter is used
[  3147.605] (II) fglrx(0): Lid Open Received
[  3147.605] (II) fglrx(0): Lid Open Received
[  3147.722] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  3147.862] (II) fglrx(0): EDID vendor "CPT", prod id 5311
[  3147.862] (II) fglrx(0): Printing DDC gathered Modelines:
[  3147.862] (II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1425 1464 1560  768 773 783 806 -hsync -vsync (48.4 kHz eP)